innovest1
innovest1
ItemsSinexcel Ultra Series SVG
Rating30K/50K100K
FunctionReactive power and three-phase unbalance compensation
System parameters
Nominal voltage380/400/415V (228-456V)
L-N voltage220/230/240V (127-263V)
Nominal frequency50/60Hz, auto sensing (Range : 45Hz~62.5Hz)
Parallel quantitiesUnlimited
Efficiency99%
Connection type3 Phase 3 Wire / 3 Phase 4 Wire
CT locationLoad / Supply side
Performance indicators
Zero-Sequence compensation rate3 times capacity compensated, 97%.
Fast response Time< 50us
Full response Time< 15ms
Target power factorAdjustable from -1 to +1
Switching frequencyAverage 40kHz, up to 90kHz
Cooling air requirement50CFM*3
Noise level<60dB (Full load)
Communications portsRS485 and Ethernet port (optional)
Communications protocolsModbus RTU, TCP/IP (optional)
Module display interface4.3-inch HMI(module), 7-inch HMI(centralized monitor) and LED
Protection functionsOver-voltage protection, under-voltage protection, inverter bridge inverse protection, over-compensation protection and so on
Dimensions (W x D XH mm)500*520*88500*520*100
Net weight25kg32kg
Storage temperature-400°C~700°C
Operating Ambient temperature-20°C ~40°C (may derate capacity if ambient temperature exceeds 45 °C)
Relative humidity5% to 95%, non-condensing
Altitude≤1500m, 1500-4000m, capacity is derating 1% for every 100m altitude increased.
Protection classIP20 (IP grade supports customizable)
QualificationsCE (400V type SVG); ETL (Compatible 380~480V type SVG)

APPENDI X I SINEXCEL ULTRA SVG SPECIFICATION

Note: Sinexcel Ultra module will glue inside, which the weight of shipping module needs to add 5kg;

Table A-1 Shipping Weight
Shipping ModuleWeight
Sinexcel Ultra SVG 100K37kg